Lippert Titan

An enhancement to the first-ever automatic hydraulic leveling system / Internet of Things (IoT)

The Titan Hydraulic Leveling System includes six points of contact utilizing aluminum jacks and a multi-valve system. Our UX team within Product Development at Lippert Technologies designed a touchscreen that can be operated in manual mode or fully automatic mode, with a native mobile app companion.

Arrival

During Arrival Mode, landing gear jacks can be operated any time the system is on. the user can Press and hold the Extend button, so that both the front or landing gear jacks can be extended.

All jacks operate when the system is performing an Auto Operation such as Auto Level, Return to Hitch Height, or Retract All.

Camping

Users can Auto Level or choose a custom set point. Users can set up-to three custom set points for your leveling system. These will be set to the factory default unless changed.

Front landing gear will retract, lowering the front of the unit below level, stopping, then lifting the front end to level the unit front-to-back. The left side leveling jack extends and raises the roadside of the unit. The right side leveling jack extends and raises the curbside of the unit, beginning side-to-side leveling. The front landing gear extend to complete the leveling cycle. Additional left-to-right or front-to-back leveling may occur, if the controller deems necessary

Departure

From the Departure screen the user can press Return to Hitch Height. The front of the trailer will raise to the height where the auto level sequence was started. The user can now connect the tow vehicle and make sure 5th Wheel and hitch are connected and locked. The Extend and Retract buttons will put the weight of the RV onto the tow vehicle. The Retract All button will automatically retract all the jacks. The user can stop the automatic Retract All sequence at any time by pressing the screen.